Product Care

Maintenance & Care

• Do not wash your vehicle for 72 hours after your COLOR PPF installation.
• Do not use automatic tunnel car washes, this will severely scratch and damage the finish.
• A traditional hand wash is recommended out of direct sunlight once the vehicle has cooled.
• We recommend washing the vehicle every 2 weeks or ~600 miles.
• Dry the vehicle after each wash using an electric blower or plush microfiber drying towel.
• Do not let contaminants (bugs, bird residue, hard water spots) sit and dry on the surface; remove as soon as possible.
• Do not use unapproved solvents, chemicals or abrasives on the film.
• Apply XPEL Ceramic Boost after each wash.
• While using a pressure washer, stay 3ft away from the paintwork.
• If damage occurs, however small, contact your XPEL Authorized Dealer.
• We recommend a yearly inspection with your XPEL Authorized Dealer.
• The maintenance schedule depends on a variety of factors; mileage, storage conditions, driving style, climate and road conditions. The more the vehicle is subjected to, the more routine maintenance is required.

To keep your film looking great, follow a few simple guidelines:

• Wait 48 hours after installation to wash your car.

• Remove insect or other stains as soon as possible with XPEL Film Cleaner.
• Stubborn stains can be removed with 99% isopropyl alcohol. Take care to keep these chemicals off the vehicle’s paint.
• Seal with XPEL Ceramic Boost at least once every 6 months to preserve high gloss.
• Light scratches in the film will self-heal in 20-30 minutes at room temperature. In colder conditions, or to accelerate the process, pour warm water (120°F) over the affected area.
• Avoid using a pressure washer or high-pressure water source near the edges of the film, it can cause the film to lift and/or become damaged.
• Detailing Clay can be used to remove contaminants that are on the film.

To keep your film looking great, follow a few simple guidelines:

• Wait 48 hours after installation to wash your car.
• Remove insect or other stains as soon as possible with XPEL Film Cleaner.
• Stubborn stains can be removed with 99% isopropyl alcohol. Take care to keep these chemicals off the vehicle’s paint.
• Seal with XPEL Ceramic Boost at least once every 6 months to preserve high gloss.
• Light scratches in the film will self-heal in 20-30 minutes at room temperature. In colder conditions, or to accelerate the process, pour warm water (120°F) over the affected area.
• Avoid using a pressure washer or high-pressure water source near the edges of the film, it can cause the film to lift and/or become damaged.
• Detailing Clay can be used to remove contaminants that are on the film.

To keep your film looking great, follow a few simple guidelines:

• Wait 48 hours after installation to wash your car.
• Remove insect or other stains as soon as possible with XPEL Film Cleaner.
• Stubborn stains can be removed with 99% isopropyl alcohol or lacquer thinner. Take care to keep these chemicals off the vehicle’s paint.
• Seal with XPEL Ceramic Boost at least once every 6 months to preserve and maintain satin finish.
• Light scratches in the film will self-heal in 20-30 minutes at room temperature. In colder conditions, or to accelerate the process, pour warm water (120°F) over the affected area.
• Avoid using a pressure washer or high-pressure water source near the edges of the film, it can cause the film to lift and/or become damaged.

Professional removal of the film is recommended.

However, when professional removal is not possible, the film may be removed as follows:

• Removal of paint protection film should be done with a steamer. It will keep the film pliable and wet so that it can be “stretched” off the vehicle.
• Peel one corner of the film up with your fingernail.
• Pull the film towards you at a shallow angle less than 45 degrees (see figure 8a). This angle is important to ensure sure that the adhesive comes off with the film rather than staying on the paint. The film should “stretch” off the car.
• If any adhesive is left on the car, use a general adhesive remover to help loosen it.

See our Paint Protection Film Frequently Asked Questions page for more info: Click here

XPEL TPU Windshield Film Care and Maintenance Guidelines 

To ensure your XPEL Windshield Film continues to provide optimal protection and clarity, follow these care and maintenance guidelines. Your installation includes a complimentary XPEL WPF Restore to be applied at the 6-month mark for enhanced performance.  

Initial Care

• Post-Installation: After installation, avoid washing your vehicle for at least 48 hours to allow the film to properly adhere and cure. XPEL also recommends purchasing and installing a new set of premium windshield wiper blades.  

Washing Guidelines

• Hand Washing: We recommend hand washing your vehicle using XPEL Wash Solution or Foam Soap and a soft microfiber mitt. Rinse thoroughly with water. 

• Pressure Washing: Keep the nozzle at least 36 inches (1 meter) away from the film when using a pressure washer. Avoid spraying directly at the edges of the film to prevent lifting. We recommend using a 40-degree nozzle.  

• Avoid Harsh Chemicals: Do not use strong chemicals, solvents, or abrasive cleaning tools on the film, as these can damage the protective coating. 

• Drying: Always dry the vehicle with a clean, soft microfiber towel to avoid water spots. Avoid letting the vehicle air-dry in direct sunlight. 

Stain and Contaminant Removal

• Bird Droppings & Bug Splatter: Remove contaminants like bird droppings and bug splatter as soon as possible to prevent staining. Use warm water and a pH neutral soap. In an emergency on-the-go you can apply XPEL SiO2 Waterless Wash to the affected area and wipe off with microfiber towel  

• Tree Sap & Tar: For stubborn contaminants like tree sap and tar, use 50/50 Water & Isopropyl Alcohol in a spray bottle. Spray the mixture directly onto microfiber towel and wipe the affected area. 

Film Maintenance 

• Regular Cleaning: Clean the film regularly with XPEL Wash Solution or Foam Soap included in the XPEL TPU Windshield Film Maintenance Kit, to maintain the clarity and appearance of the film. 

• Avoid Waxing: Do not apply waxes or polishes that contain dyes, abrasive compounds, or solvents directly onto the film. 

6-Month WPF RESTORE Application

• "XPEL WPF Restore” Application: At the 6-month mark, apply the XPEL TPU Windshield Coating Spray provided with your installation. This coating enhances the hydrophobic properties of the film, ensuring optimal performance and longevity. 

• Application Instructions: 

1. Ensure the windshield is clean and dry. 

2. Shake the XPEL WPF Restore bottle well. 

3. Lightly mist the spray onto the film surface into 4 sections of the windshield, ensuring full coverage. 

4. Use a clean new microfiber towel to evenly spread and buff the coating until the film has a clear, smooth finish. 

Winter Care

• Snow and Ice Removal: Avoid using sharp tools or metal scrapers that could damage the film. 

Important Notes

• Wiper Blades: We recommend replacing your windshield wiper blades regularly to prevent scratches or damage to the film. 

By following these guidelines and applying the XPEL TPU Windshield Coating Spray at the 6-month mark, you can ensure the longevity and performance of your XPEL Windshield Film, keeping your vehicle protected and looking its best. 

For any additional questions or concerns, please contact our support team ([email protected]) or visit our WWW.XPEL.COM for more information. 

• Aftercare: Using XPEL aftercare products when detailing your various surfaces will significantly extend the life of FUSION PLUS. Our products have been designed to complement our coatings and will help keep your surface looking newer, and longer.
• Cleaning: For exterior cleaning, we recommend using XPEL Rinse Free Car Wash every week, to avoid excessive contamination buildup. Avoid washing in direct sunlight to minimize streaking and water spotting. Wash from the roof downwards, leaving the dirtiest sections last, avoiding possible cross-contamination. You can follow up with XPEL Detail Spray and XPEL Ceramic Boost for added gloss. For interior cleaning, we recommend using XPEL Interior Cleaner (as needed) on your leather, plastics, and non-fabric surfaces. For fabric areas, we recommend vacuuming and using a clean, dry microfiber. We recommend testing in an inconspicuous area before applying XPEL Interior Cleaner – please read the directions before applying.
• Drying: Always dry the exterior surfaces completely using a clean, soft, lint-free microfiber towel or air blower. Never allow water to evaporate on its own. Tap water can contain minerals that leave deposits on your coating, creating unwanted water spots. For best results use XPEL Microfiber Towels, which have been designed to absorb water. Always avoid aggressive wiping.
• Detailing: For exterior surfaces, follow the washing and drying steps above. Follow up with XPEL Detail Spray for any left- over fingerprints or smudges on your paint protection film or surface. You can apply the XPEL Ceramic Boost (as needed) for added shine and slickness. Avoid applying XPEL Detail Spray or XPEL Ceramic Boost in direct sunlight, to minimize streaking and water spotting.
• Spot Removal of Surface Contamination: Never use aggressive products to polish the coating or to remove surface contamination. Visit your authorized XPEL FUSION PLUS installer for any questions you have on your coated surfaces.

• Vehicle Inspection Schedule: To uphold the FUSION PLUS warranty, you must visit your FUSION PLUS certified installer (who applied your original coating), annually, during the duration of warranty. If you have had a change of address, please email [email protected] with any questions.
• Warranty Coverage: XPEL FUSION PLUS is warrantied from date of original application (upon registration) and maintained in accordance with outlined warranty and conditions. For complete warranty information visit xpel.com/warranty-information