2013 BMW 650i Protected by XPEL San Antonio.

  Drop Top BMW 6 Series Protected with XPEL Clear Bra Protect your German Sports Car with paint protection film. While the BMW 6 Series dates back to 1976, it's only in it's third generation. Production halted in 1989 and resumed again in mid 2003. This generation, dubbed the F12/F13 even comes in a fastback sedan version called the Gran Coupe. Reviews on the new 6 Series give it high praise for being  "... more driver-oriented, befitting a car with sporting aspirations--particularly a BMW." -Car and Driver. This newer iteration also sports forced induction by the way of turbocharging. Two to be exact. Adding forced induction lets you get decent fuel economy, while maintaining the performance you desire from an open top German sports car.       Below are examples of the patterns that were installed on this BMW 650 Partial Hood, Partial Fenders, Mirrors and Bumper Kit XPEL Ultimate Self-healing Clear Bra XPEL ULTIMATE leads the industry with it's clarity, durability, gloss retention and more. We stand behind our product 100%, so much so that ULTIMATE has a 10-year warranty covering defects such as yellowing, cracking, staining, blistering and/or delaminating. Protecting your car has many benefits. It will help maintain your car’s factory finish, make your car easier to clean, help the resale value of your vehicle, all while it is being protected from every day driving. Demonstration of our XPEL ULTIMATE self-healing properties Our XPEL ULTIMATE film self-heals from light scratches, swirl marks and rock chips while driving or maintaining your vehicle. During the show we use a Brass wire brush to simulate the every day occurrences that can affect the film. With the sun on the display the scratches from the brush instantly disappear. When the sun is not available, you can accelerate the healing process with a cup of warm water or a heat source. Not all Patterns are created equal At XPEL we pride ourselves on our pre-cut pattern software. By using a pre-cut pattern you’ll have less to worry about, since the installer will not be trimming the film on your vehicle. Using a pre-cut pattern the film will naturally fit without excessive stretching or contortion, which means the finished product not only lines up perfectly but is free of defects which could be visible once the install is finished. Contrary to what some may believe it’s possible to wrap edges using a computer cut pattern which gives you a much better protection and installation. With XPEL Technologies Corp., all patterns are available with precision cut wrapped edges where possible. Where a wrapped edge is not possible, for example around the parking sensors on a bumper, reverse cameras and more, the film is always machine cut with precision. You can pick and choose your coverage options. Door handle inserts, also known as door cups. This area is prone to getting scratched when entering and exiting the vehicle with rings, fingernails, etc... Luggage Area Kit. This area is prone to damage due to items being removed from the trunk. Headlights and/or Fog-lights Kit Rocker Panels High Impact Areas        

  • Read Story
  • Share
    [easy-social-share buttons="twitter,facebook,pinterest,more" morebutton="2" morebutton_icon="plus" counters=0 style="icon" template="deluxe-retina" url="http://www.xpel.com/2013-bmw-650i-protected-by-xpel-san-antonio/" text="2013 BMW 650i Protected by XPEL San Antonio."]

2006 BMW 650i Convertible Carbon Fiber Vinyl Installation

XPEL Carbon Fiber Vinyl Complete Body Wrap Wrapped Edges Everywhere Possible Kevin Williams owner of Forcefield Paint Shield www.forcefieldpaintshield.com wrapped this 2006 BMW 650i in XPEL's Carbon Fiber film. The customer requested that the aftermarket front and rear ground effects kits, rocker panels and decklid spoiler that were recently installed to be completely covered. The installation required that all lights, trim, door handles, etc. be removed and then reinstalled after the carbon fiber film had been applied. This also included all the film edges that were rolled and the film seams and directional patterns to be matched. The installation took place at Forcefield Paint Shield in Denton, Texas. Other services offered at Forcefield Paint Shield are Paint Protection Film, Headlight Protection, minor automotive repair and painting such as replacement of mirrors, bumpers, etc. XPEL Ultimate Self-healing Clear Bra XPEL ULTIMATE leads the industry with it's clarity, durability, gloss retention and more. We stand behind our product 100%, so much so that ULTIMATE has a 10-year warranty covering defects such as yellowing, cracking, staining, blistering and/or delaminating. Protecting your car has many benefits. It will help maintain your car’s factory finish, make your car easier to clean, help the resale value of your vehicle, all while it is being protected from every day driving. Demonstration of our XPEL ULTIMATE self-healing properties Our XPEL ULTIMATE film self-heals from light scratches, swirl marks and rock chips while driving or maintaining your vehicle. During the show we use a Brass wire brush to simulate the every day occurrences that can affect the film. With the sun on the display the scratches from the brush instantly disappear. When the sun is not available, you can accelerate the healing process with a cup of warm water or a heat source. Not all Patterns are created equal At XPEL we pride ourselves on our pre-cut pattern software. By using a pre-cut pattern you’ll have less to worry about, since the installer will not be trimming the film on your vehicle. Using a pre-cut pattern the film will naturally fit without excessive stretching or contortion, which means the finished product not only lines up perfectly but is free of defects which could be visible once the install is finished. Contrary to what some may believe it’s possible to wrap edges using a computer cut pattern which gives you a much better protection and installation. With XPEL Technologies Corp., all patterns are available with precision cut wrapped edges where possible. Where a wrapped edge is not possible, for example around the parking sensors on a bumper, reverse cameras and more, the film is always machine cut with precision. You can pick and choose your coverage options. Door handle inserts, also known as door cups. This area is prone to getting scratched when entering and exiting the vehicle with rings, fingernails, etc... Luggage Area Kit. This area is prone to damage due to items being removed from the trunk. Headlights and/or Fog-lights Kit Rocker Panels High Impact Areas    

  • Read Story
  • Share
    [easy-social-share buttons="twitter,facebook,pinterest,more" morebutton="2" morebutton_icon="plus" counters=0 style="icon" template="deluxe-retina" url="http://www.xpel.com/2006-bmw-650i-convertible-carbon-fiber-vinyl-installation/" text="2006 BMW 650i Convertible Carbon Fiber Vinyl Installation"]