Lamborghini is known for making cars wallpaper worthy. They did just that with the Aventador and Aventador Roadster. This model produces 700 horsepower delivered to all four wheels, which can move this 4300 pound supercar to 60 miles per hour in less than 3 seconds.
Before installation the installer will clean and prep the car accordingly. Best methods are to wash and clay bar the painted surfaces that will receive paint protection film. By using a clay bar you remove any contaminants and even waxes/coatings that may have been applied. Having a wax or coating on the car could interfere with the adhesion of the film over time causing it to possibly lift. Once the paint is washed and clayed, the installer is ready to work. XPEL ULTIMATE does a great job of masking existing fine scratches and swirl marks, so the majority of the time paint correction is not needed.
Below are examples of the patterns that were installed on this Aventador Roadster LP 700-4
Hood, Fenders and Mirrors Kit
XPEL Ultimate Self-healing Clear Bra
XPEL ULTIMATE leads the industry with it’s clarity, durability, gloss retention and more. We stand behind our product 100%, so much so that ULTIMATE has a 10-year warranty covering defects such as yellowing, cracking, staining, blistering and/or delaminating.
Protecting your car has many benefits. It will help maintain your car’s factory finish, make your car easier to clean, help the resale value of your vehicle, all while it is being protected from every day driving.
Demonstration of our XPEL ULTIMATE self-healing properties
Our XPEL ULTIMATE film self-heals from light scratches, swirl marks and rock chips while driving or maintaining your vehicle. During the show we use a Brass wire brush to simulate the every day occurrences that can affect the film. With the sun on the display the scratches from the brush instantly disappear. When the sun is not available, you can accelerate the healing process with a cup of warm water or a heat source.
Not all Patterns are created equal
At XPEL we pride ourselves on our pre-cut pattern software. By using a pre-cut pattern you’ll have less to worry about, since the installer will not be trimming the film on your vehicle. Using a pre-cut pattern the film will naturally fit without excessive stretching or contortion, which means the finished product not only lines up perfectly but is free of defects which could be visible once the install is finished.
Contrary to what some may believe it’s possible to wrap edges using a computer cut pattern which gives you a much better protection and installation. With XPEL Technologies Corp., all patterns are available with precision cut wrapped edges where possible. Where a wrapped edge is not possible, for example around the parking sensors on a bumper, reverse cameras and more, the film is always machine cut with precision.
You can pick and choose your coverage options.