Ensure that the surface is clean and dry. It is preferred to install XPEL film in the shade and not direct sunlight.

1. Remove the product from the package and without removing the liner, test fit the pieces on the vehicle to check for width and length.
2. Cut an appropriate size piece of film from the roll using a pair of scissors.
3. Remove a few inches of the liner on one end, carefully line that end up and install it by smoothing the product down with your hand. Press gently at first, then once you have ensured that it is lined up straight, push firmly to eliminate any bubbles.
4. Slowly remove the rest of the liner while smoothing down the product with your hand.
5. Once installed, do not pick at the edge of the product, nor point high-pressure sprayers/car washers at the edge.

Kit contents: 17´ x 4" XPEL Black Protection Film
Package size: 4" x 7" x 2.5"
Part # R3029-1

XPEL Bed Rail Guards are designed to withstand years of wear and tear, but can be easily removed if needed. Please visit www.xpel.com for complete removal instructions.

XPEL Protection Film can also be applied to:

• Stainless steel	• Ceramic
• Plastic	• Lacquered wood
• Chrome	• Porcelain
• Granite

This makes the film suitable for protecting a vast array of consumer products such as iPods, MP3 players, laptops, mobile phones, PDAs, wristwatches, appliances, countertops, automotive paint, bicycles, motorcycles, and sporting goods.