BMW M235i XPEL Clear Bra Paint Protection

0 Comment

IMG_0581BMWM235iClearBraXPEL

The (new) Bavarian Deuces

Power-Packed Turbocharged Inline 6 Cylinder M235i
protected with XPEL ULTIMATE.

The 2014 2-Series coupe was designed to bring the E36 (1995-1999 M3) and E46 (2000-2006 M3) crowd back to a new generation of BMW. It has been called the modern day E46 M3 due to multiple variables, but the two that stand out are the power and dimensions. The biggest thing attracting new buyers is the power. The M235i delivers 320 horsepower through a Twin-Turbo Inline 6-cylinder M-tuned motor. The E46 M3 delivered 333 horsepower through a naturally aspirated 3.2 Liter M-tuned motor. Although the M235i has less horsepower, it shaves .7 seconds off of the 0-60 mph time, at an impressive 4.6 seconds! While they are both coupes, the M235i is 2 inches shorter, .2 inches skinnier width and 1 inch taller than the E46 Series M3. So, generally speaking the M235i is the closest thing we will get to an modern day E46 M3 BMW.

This powerful M235i received the protection it deserved with XPEL ULTIMATE Full Hood, Headlights, Fenders, Mirrors, and Bumper Kit. Here

 

 

Installation Pictures

 

Below are examples of the patterns that were installed on this M235i BMW

Hood, Fender, Mirror and Bumper Kit

bimmer hoodP2162I

To view the pattern for your vehicle: Click Here

XPEL Ultimate Self-healing Clear Bra

XPEL ULTIMATE leads the industry with it’s clarity, durability, gloss retention and more. We stand behind our product 100%, so much so that ULTIMATE has a 10-year warranty covering defects such as yellowing, cracking, staining, blistering and/or delaminating.

Protecting your car has many benefits. It will help maintain your car’s factory finish, make your car easier to clean, help the resale value of your vehicle, all while it is being protected from every day driving.

Demonstration of our XPEL ULTIMATE self-healing properties

Our XPEL ULTIMATE film self-heals from light scratches, swirl marks and rock chips while driving or maintaining your vehicle. During the show we use a Brass wire brush to simulate the every day occurrences that can affect the film. With the sun on the display the scratches from the brush instantly disappear. When the sun is not available, you can accelerate the healing process with a cup of warm water or a heat source.

Not all Patterns are created equal

At XPEL we pride ourselves on our pre-cut pattern software. By using a pre-cut pattern you’ll have less to worry about, since the installer will not be trimming the film on your vehicle. Using a pre-cut pattern the film will naturally fit without excessive stretching or contortion, which means the finished product not only lines up perfectly but is free of defects which could be visible once the install is finished.

Contrary to what some may believe it’s possible to wrap edges using a computer cut pattern which gives you a much better protection and installation. With XPEL Technologies Corp., all patterns are available with precision cut wrapped edges where possible. Where a wrapped edge is not possible, for example around the parking sensors on a bumper, reverse cameras and more, the film is always machine cut with precision.

You can pick and choose your coverage options.

  • Door handle inserts, also known as door cups. This area is prone to getting scratched when entering and exiting the vehicle with rings, fingernails, etc…
  • Luggage Area Kit. This area is prone to damage due to items being removed from the trunk.
  • Headlights and/or Fog-lights Kit
  • Rocker Panels
  • High Impact Areas

 

XPEL LOCATOR LINK