2011 Audi R8 V10 XPEL Clear Bra Installation

0 Comment

XPEL XTREME Paint Protection Film
Custom Bulk Installation
Wrapped Edges

Adam Lassinger of Prestige Auto Armor covered all the vulnerable surfaces of this new R8 V10 in XPEL XTREME Paint Protection Film.

Adam began by removing the factory Audi badging and then installed a full custom hood wrapping all the edges, providing a seamless installation with no visible edges. Once the installation was complete, the badges were reapplied making it impossible to tell the hood was covered with film.

Adam then covered the A-pillars, leading edge of the roof, the front and rear bumpers, the Carbon Fiber side blades, rocker panels and doors.

Adam is an authorized and factory trained XPEL Installer and services Western Pennsylvania. For more information on his operation, please visit www.prestigeautoarmor.com.

XPEL Ultimate Self-healing Clear Bra

XPEL ULTIMATE leads the industry with it’s clarity, durability, gloss retention and more. We stand behind our product 100%, so much so that ULTIMATE has a 10-year warranty covering defects such as yellowing, cracking, staining, blistering and/or delaminating.

Protecting your car has many benefits. It will help maintain your car’s factory finish, make your car easier to clean, help the resale value of your vehicle, all while it is being protected from every day driving.

Demonstration of our XPEL ULTIMATE self-healing properties

Our XPEL ULTIMATE film self-heals from light scratches, swirl marks and rock chips while driving or maintaining your vehicle. During the show we use a Brass wire brush to simulate the every day occurrences that can affect the film. With the sun on the display the scratches from the brush instantly disappear. When the sun is not available, you can accelerate the healing process with a cup of warm water or a heat source.

Not all Patterns are created equal

At XPEL we pride ourselves on our pre-cut pattern software. By using a pre-cut pattern you’ll have less to worry about, since the installer will not be trimming the film on your vehicle. Using a pre-cut pattern the film will naturally fit without excessive stretching or contortion, which means the finished product not only lines up perfectly but is free of defects which could be visible once the install is finished.

Contrary to what some may believe it’s possible to wrap edges using a computer cut pattern which gives you a much better protection and installation. With XPEL Technologies Corp., all patterns are available with precision cut wrapped edges where possible. Where a wrapped edge is not possible, for example around the parking sensors on a bumper, reverse cameras and more, the film is always machine cut with precision.

You can pick and choose your coverage options.

  • Door handle inserts, also known as door cups. This area is prone to getting scratched when entering and exiting the vehicle with rings, fingernails, etc…
  • Luggage Area Kit. This area is prone to damage due to items being removed from the trunk.
  • Headlights and/or Fog-lights Kit
  • Rocker Panels
  • High Impact Areas

XPEL LOCATOR LINK

2011_Audi_R8_V10_XPEL_Clear_Bra_Pittsburg_PA14

2011_Audi_R8_V10_XPEL_Clear_Bra_Pittsburg_PA1

2011_Audi_R8_V10_XPEL_Clear_Bra_Pittsburg_PA15

2011_Audi_R8_V10_XPEL_Clear_Bra_Pittsburg_PA9

2011_Audi_R8_V10_XPEL_Clear_Bra_Pittsburg_PA5

2011_Audi_R8_V10_XPEL_Clear_Bra_Pittsburg_PA4

2011_Audi_R8_V10_XPEL_Clear_Bra_Pittsburg_PA11

2011_Audi_R8_V10_XPEL_Clear_Bra_Pittsburg_PA10

2011_Audi_R8_V10_XPEL_Clear_Bra_Pittsburg_PA8

2011_Audi_R8_V10_XPEL_Clear_Bra_Pittsburg_PA7

2011_Audi_R8_V10_XPEL_Clear_Bra_Pittsburg_PA6

2011_Audi_R8_V10_XPEL_Clear_Bra_Pittsburg_PA2

2011_Audi_R8_V10_XPEL_Clear_Bra_Pittsburg_PA13

2011_Audi_R8_V10_XPEL_Clear_Bra_Pittsburg_PA12

2011_Audi_R8_V10_XPEL_Clear_Bra_Pittsburg_PA3